Schema-Root.org logo

 

  cross-referenced news and research resources about

 3D printers

Schema-Root.org logo
images:  google   yahoo YouTube
spacer

updated Sat. May 27, 2017 reload page to refresh

-
MINSK, 26 May (BelTA) - A school student demonstrated the 3D printer he had personally assembled to Belarus President Alexander Lukashenko on 26 May, BelTA has learned.
Researchers say one way to control VOC emissions from 3D printers is by using photocatalytic filters. They use ultraviolet light to limit exposures.

Bridget Lemoine and Amy U. Jarreau at Prairieville Middle school were awarded $2,500.00 by the school impact Ascension Fund Grant funding by BASF corporation for the 2016 - 2017 fiscal year.
The Waggle supports most 3D printers that run open source firmware "right out of the box," says the Ateam Ventures. Their list of several dozen supported printers include RepRap, Ultimaker, Printrbot, Prusa, LulzBot, MendelMax, Monoprice, and many more.
And as if that list wasn't impressive enough for such a cheap 3D printer, the BuildOne is even compatible with a number of add-ons, some of which you won't find on 3D printers twice or three times as expensive. These add-ons include a PEI bed for "easy ...
3D printing, particularly FDM 3D printing, involves a lot of heat. Heated print head, heated build chamber, heated build platform - it's all necessary to melt plastic filament and ensure that it stays soft enough to adhere to the build plate and to ...

Upstate NY dad uses 3D printer to make fidget spinners, sells them for $4 (video). Fidget Spinner Craze. In this May 11, photo, customers look over the selection of fidget spinners at the Funky Monkey toys store in Oxford, Mich.
NORTHBROOK -- Impossible Objects' Model One 3-D printer has been named the winner of the RAPID + TCT Innovation Award for 2017.
A teenage boy who almost died in a horrific freak cycle accident is using a "plastic finger" made with a 3D printer to get through his exams. Oliver Smith, 15, severed a main artery and two nerves in his arm and lost five PINTS of blood after he ...
technology is something we tend to take for granted, yet every industry is moving at the speed of technology. This is particularly true of the construction industry, which itself has undergone a metamorphosis driven by technology.
Three Windsor high school students in Roland Downing's engineering II class attended a special two-day class at the Smithfield high school maker's space alongside Smithfield students, where they learned to construct and operate a 3D printer. The ...
California-based 3D printing company Dagoma has launched a Kickstarter campaign for its new NEVA delta 3D printer. The campaign has already raised over ...
BoXZY got its start in Pittsburgh, PA two years ago when brothers and co-founders Joel and Justin Johnson had the idea to create a machine that can create just ...
Kudo3D, the California-based company behind the Titan line of SLA 3D printers, is preparing a Kickstarter campaign for its latest 3D printer, the Bean. Billed as "the ultimate consumer SLA 3D printer," the Bean will be available from just $199 (Super ...
M3D, the company behind the world's most successful 3D printer crowdfunding campaign, has today announced the commercial launch of a pair of new FDM 3D printers, the M3D Pro and Micro+. The M3D Pro was the subject of a successful ($487K) ...
M3D, a 3D printing company based in Maryland, USA has announced the official launch of its new M3D Pro and Micro+ 3D printers. The company was founded in 2012, and in 2014 launched its Micro 3D printer on Kickstarter. One half of M3D's new ...
In this study by Northwestern University researchers, the 3D printer created a 3D replica of an ovary out of gelatin and two types of mouse ovary cells which were then implanted into the mice.

Nano Dimension's beta program offers leading companies and partners worldwide the opportunity to lease the DragonFly 2020 3D printer for a fee. These customers are pioneers of additive manufacturing technology and techniques for electronics and ...
This aggregation provides a look into some of the most recent reviews of desktop 3D printers available. PCMag.com recently reviewed the XYZprinting da Vinci Jr.
This aggregation provides a look into some of the most recent reviews of desktop 3D printers available. PCMag.com recently reviewed the XYZprinting da Vinci Jr.
Bismarck teacher Nathan Pruett describes to board of education members how his students designed and made small glider planes using a 3D printer owned by the school and then tested them outdoors. He said the printer will be used for a wide range of ...
As powerful as plastics are for 3D printing, nothing says "critical parts" like metal additive manufacturing (AM). As humans learned long ago, metals can provide strength like no other material can.
The Formlabs Form 2 is a prime example of an all-around good 3D printer. It is being advertised as the most advanced desktop 3D printer by its manufacturers. The print material, a liquid called resin, starts at $149 per one-liter cartridge (about 1kg ...
The M200 pack is a fully integrated plug-and-play system that allows users to get up-and-running immediately and includes the 3D printer, starter kit, dedicated intuitive software bundle Z-SUITE, and compatible material. Specifications of the M200 ...
Connectivity is becoming more and more important for businesses that have adopted 3D printing - connectivity between multiple 3D printers in the same office, between printers in multiple office locations, between printers and computers, etc. As ...
Your furniture could soon be made in vats of gel. Researchers at MIT's Self-Assembly Lab and the furniture company Steelcase have partnered up to design a 3D printer that can create an object in a matter of minutes (typical 3D printers can take hours).
2 Don't Threaten or Abuse. Threats of harming another person will not be tolerated. AND PLEASE TURN OFF CAPS LOCK. 3 Be Truthful.
... a small, $200 3D printer. At the time, a fully functioning printer at this price point wasn't unheard of. A good 3D printer at this price point was. It turned out this printer was actually fantastic and completely changed the value proposition of ...
Hector Martinez (left), co-founder of Cellink, teaches Virginia Tech researchers Megan Cox, Ishan Goswami and Nastaran Alinezhad how to use a newly installed Cellink bioprinter at the Laboratory for Integrative Tumor ecology.
California-based advanced manufacturing company Fathom has partnered with Massachusetts-based 3D printing company Desktop Metal. Fathom will use ...
Russian scientists have developed a 3D-printer that will be able to work in zero gravity to produce tools and various spare parts while in space.
With 3D printer technologies becoming robust enough to be used in a manufacturing process, HP is recruiting partners that have manufacturing expertise to drive adoption of 3D printers as an alternative to injection molding. "We want to lead the next ...
O ne of the problems in building human-like robots is giving them our ability to feel. Sensory devices capable of feeling objects have existed for a long time, but the problem comes with creating sensors malleable enough for use on a moving robotic limb.
It's been a few months since the last Pinshape design contest we talked about, but the wait is over! The popular online marketplace for 3D printable models is announcing a new contest, the Mechanical Design Challenge, sponsored by Formlabs, 3D Hubs, ...
To jump on the opportunity that will be created by much faster 3D printers that can manufacture products in volume, HP launched a 3D printer reseller program.
O ne of the problems in building human-like robots is giving them our ability to feel. Sensory devices capable of feeling objects have existed for a long time, but the problem comes with creating sensors malleable enough for use on a moving robotic limb.
This is why A-Team Ventures, a South Korean creative venture company, has launched Waggle, a remote control for 3D printers that is compatible with many kinds of 3D printer, old and new. The device is a bit like the Raspberry Pi-powered AstroBox ...
In early May (or the second quarter), entered into a partnership with Desktop Metal, a manufacturer of metal 3D printers, whereas Desktop will sell its products via Stratasys' distribution channel.
The M200 pack is a fully integrated plug-and-play system that allows users to get up-and-running immediately and includes the 3D printer, starter kit, dedicated intuitive software bundle Z-SUITE, and compatible material. Specifications of the M200 ...
For such manufacturing applications a large reliable 3D printer with a lot of uptime and high repeatability would be required.
3D Platform arrived at RAPID + TCT in Pittsburgh last week with several new product innovations including two new machines; the 100 Series WorkTable entry-level large-format 3D printer and the WorkbenchXTreme, and a new series of super-fast extruders.
Anyone who currently owns a 3D printer and would like to control it wirelessly may be interested in a new piece of hardware created by Joseph Sungpil Choi called Waggle.
In early May (or the second quarter), entered into a partnership with Desktop Metal, a manufacturer of metal 3D printers, whereas Desktop will sell its products via Stratasys' distribution channel.
A student from Naberezhnye Chelny branch of the Kazan Federal University Gulnaz Nasibullina attained an artificial arm yesterday. The girl was established a hand prosthesis Kibi developed by Motorika.
An engineer whose company donated a 3D printer to a school hopes it will inspire the next generation of creative thinkers. Andrew Baldwin from Parker Kittiwake visited The Angmering School in Station Road to donate the equipment and did a demonstration ...
Made In Space has released two new videos that demonstrate how its Archinaut additive manufacturing system will work. The project, which has been in ...
Earlier this year, San Francisco-based 3D-printing start-up Apis Cor used a huge 3D printer to design and install concrete walls on a test home site in Russia.
Collider, a 3D printing startup based in Chattanooga, Tennessee, is developing a multi-material 3D printer that combines 3D printing and injection molding.
The VSHAPER One Pro, which was recently presented at Hannover Messe with Verashape's other 3D printers, was designed to create prints with enhanced thermal and mechanical endurance, often used as alternatives to manufactured elements made of ...
A team of researchers has taken the next step in regenerative medicine, creating the first 3D-printed ovaries, using gelatin as the printer's "ink.


spacer

 


 


 


 


schema-root.org

   printers
     3d
       reprap